Tungsten Disulfide aerosol spray And Their Mold Release Coating

Tungsten Disulfide aerosol spray | blogger.googleusercontent.com

WS2 is a low friction dry coating of lubricant that performs better as compared to dry lubricants. This is known to reduce noise and fiction and deals with problems of excessive fretting and galling. Tungsten Disulfide aerosol spray is undertaken with pressurized form of coating that implants a dry metallic coating without the use of adhesives or bindings. The lubricant coating is known to bond instantly which has a thickness of 0.002. A lot of companies have gone on to apply WS2 for a prolonged period of time.

The care instructions of WS2

WS2 has a durable coating, and for one year it does not have to be recoated. Filled or glass resins of30 % will be reducing the coating of file due to the abrasive nature. It is better that you coat the items with WS2 coating.

Chemical solvents in the form of alcohol or mineral spirits are subject to use with no adhesive effects. Even strong alkaline acids are not to be used.

WS2 is compatible with all types of mould saver products. It is recommended that a corrosion protector is to be used on the surface during storage.

WS 2 reduces the level of fiction and goes on to enhance the life of the components by trimming down the cold trimming. It is bound to occur when a couple of metal surfaces meet and would be rubbing against each other. The dynamic coefficient is 0.30 and the static one is between 0.70 to 0.90. Surface finish, pressure along with surface hardness is known to have an impact on the results. In addition real life wear points to a change over time till the point severe overload conditions are used.

Since it is non- toxic WS2 is applicable to all metal substrates. It is imperious to most of the solvents. The gears that are used for a variety of industries may benefit from low fiction and enhance has a long life. The balls that are coated with WS2 have a longer life and some of the common areas of application are spline shafts.